iPad 2 Air padded cover
I know this is a strange cover for a iPad, however I have a reason for selecting this design. Today is Mother's Day and my hubby got me a new iPad Air 2. I wanted to make a padded cover for it. A simple cover is all I need. Since it was Mother's Day, I was thinking a lot about my Mom! She has been gone for 4 years now. I thought it would be cool to search my mom's fabric stash to find one of her many unfinished projects to help me. Then I found this! Check out this old post of some of her projects I still have to finish.
This is one of my mom's started projects. I don't even know what her intent was. She passed away 4 years ago now and there is still just so many things I still could use. Happy Mother's Day to myself. Something from my Mom to me!
So here we go.....I will lay out some simple steps I used for this beginners project!
1/2 yard fabric for outside fabric
1/2 yard fabric for inside lining
1/2 yard batting
interfacing (I used SF101 pellon)
quilting thread (I used wool thread)
elastic hair tie
point turner/ chopstick
Decide what you want for the cover. I echo quilted with brown wool thread to batting. I also quilted the appliquéd design by echoing around the flowers so they were tacked down to the batting too. I cut the front and back 2 inches bigger than the size of the iPad or device to allow for the shrinkage with quilting. Mine is an iPad Air 2 and I cut the original front and back fabric to 9 inches by 12 inches to allow for shrinkage when quilting. The final size will be 1 inch larger than your device before sewing the sides together. This is the measurement if you are not quilting and using a piece of fabric.
HINT: Measure your device with the protective case on the device, like Otterbox, skin, etc. You want to make sure it will fit in your bag with that in place.
I echo quilted around the design through to the batting
This is what the front looked like on the
batting side when I was done.
Now trimmed down to 1 inch larger
than the device 8 inches by 11 inches
This is the back, plain brown and then
quilted through to the batting
This is what the batting side looks like messy but got the job done! Trimmed down to 1 inch all larger than your device on all 4 sides.
Close up view of echo quilting
around the flower design
I also did a little quilting inside the flower
to secure it to the batting - that stitching was done
with white quilting thread and I echoed the flowers
Pin the right (pretty) sides together with the batting to the outside. Sew three sides together, leaving one side open, the one you want to device to slip into. I left a short side open so my flower could stay upright and I sewed 3 sides together.
Pin with right sides together
sew together three sides
(I stitched 5/8 inch around to hide the
Trim corners to make the bag easier to turn. Using a chopstick or point turner to get a good corner.
Corner is trimmed closely
This is what it should look like
before turning right sides out
(one side remains open and not sewn)
Make sure the device fits easily with room to move. There will be a lining so there has to be room for that because that will take up extra space. I don't have a case on my iPad but if you do, make sure however it will be used, it will will fit with that in place.
make sure iPad fits easily
Make the lining. Cut the lining 5/8 inches wider than the cover and twice the length. I sewed 2 sides and used the fold on the bottom. I sewed the 2 sides on the serger at 5/8 inches with right sides together.
The lining I cut 9 inches by 22 inches
and folded it in half
with right sides together
keep right sides together
do not turn
close up of serger stitching
Using the device placed inside the lining, place the lining into the bag. The device will help the lining go in easier.
the device will help the lining go into the
Trim the lining to match the height of the bag.
now you have the lining inside the bag
Place elastic or a hair tie to the center back of the raw edge and baste it in place. Also sew around the bag to keep the layers in place. The layers will slip less when placing on the edge if you baste it down in place.
pin the elastic to the back center and tack down
Baste top layers together
STEP 9Make the binding, or edge of the bag. Measure the length and add 2 inches. Iron on interfacing to the wrong side. Place the binding with interfacing ironed on around the OUTSIDE of the bag and mark the seam where they will meet together. Sew with right sides together to make a ring. Iron seam open and then in half lengthwise.
binding with interfacing sewn into a circle
to fit to the outside of the bag
sewn into a ring and ironed in half
with wrong sides together
Pin the binding circle to the bag and sew in place.
pin raw edges to the outside of the bag
pin raw edges together
sew 1/4 inch from edges
Turn the binding to the inside of the bag. Iron it up to get a good edge and the fold it to the inside. Sew down from the top, making sure you are catching the binding underneath. Sew overtop the elastic tie to give it extra security.
Iron the binding up
and turn to the inside
sew the binding to the inside
and sew over the elastic while they are
laying flat down
finished edge after stitching
down the binding
Add the button. That's it! Viola, it's done.
Oh my, mom's button collection is amazing!
What to choose, hmmm....
how about this one?
close up view of binding and button
My mom sewing on the back porch
many years ago!
This was my mom on her high school graduation
and the year of her death.
Love you MOM!!!!!
Mom and me